InfoCoBuild

Electronics Enclosures Thermal Issues

Electronics Enclosures Thermal Issues. Instructor: Prof. N. V. Chalapathi Rao, Department of Engineering Design, IISc Bangalore. Electronics Design is understood as analysis and implementation at various levels from large systems installation to chip design. One of the aspects is failure due to temperature effects is constantly under study. Theory of Heat transfer has been understood and explained way back in 1700. Rigor and precision has resulted in seemingly complicated equations. In the design of enclosures, managing heat is (relatively) well understood. Empirical results can be used to optimise the layout and reduce failure. Practices in use of heat management hardware are available from specialist manufacturers and can be used. This course is an attempt to familiarise the participating registrants with heat related issues in Design of Electronic Product enclosures. (from nptel.ac.in)

Lecture 04 - CEDT Worked Examples


Go to the Course Home or watch other lectures:

Thermal Issues in Electronic Products
Lecture 01 - Electronic Equipment Thermal Issues
Lecture 02 - Practical Examples
Lecture 03 - Practical Examples (cont.)
Lecture 04 - CEDT Worked Examples
Lecture 05 - CEDT Worked Examples (cont.)
Thermal Equations
Lecture 06 - Textbook Theory
Lecture 07 - Sample Heat Sinks
Lecture 08 - Published Correlations
Lecture 09 - Published Correlations (cont.)
Thermal Resistance
Lecture 10 - Parallel Combined Effects
Lecture 11 - Mounting of Packages
Lecture 12 - Combined Rth of Devices
Lecture 13 - Schonholzer Modules
Large Racks Cooling
Lecture 14 - 1972 Model Paper
Lecture 15 - Jensen Model
Lecture 16 - Thermal Management
Lecture 17 - Thermal Management (cont.)
Lecture 18 - Round up of Full Model
System Level
Lecture 19 - Fan Cooling
Lecture 20 - Thermo-electric Cooling
Lecture 21 - On-the-Net DIY Work
Electronic Cooler Profiles
Lecture 22 - Real Packages
Lecture 23 - Prior Art
Lecture 24 - OTS Standard Profiles
Lecture 25 - CAD Detailed Design of Profiles
CEDT Implementation
Lecture 26 - Round up
Lecture 27 - 4x Peltier Cooler
Lecture 28 - Manufacturing Video