InfoCoBuild

VLSI Data Conversion Circuits

VLSI Data Conversion Circuits. Instructor: Prof. Shanthi Pavan, Department of Electrical Engineering, IIT Madras. This course covers the analysis and design of CMOS Analog-to-Digital and Digital-to-Analog Converters, with about 7 design assignments. Topics covered in this course include basics of A/D and D/A conversion (sampling, quantization, quantization noise, aliasing and reconstruction filtering), ADC/DAC metrics (differential and integral nonlinearity, SNR, SNDR, SFDR and dynamic range), ADC architectures (flash ADCs, oversampling converters, successive approximation converters), and DAC design (current steering DACs). (from nptel.ac.in)

Lecture 24 - Noise Transfer Function (NTF) Design and Tradeoffs

Go to the Course Home or watch other lectures:

Lecture 01 - Introduction to Data Conversion

Lecture 02 - Sampling

Lecture 03 - Sampling (cont.)

Lecture 04 - Non-idealities in Samples

Lecture 05 - Noise due to Sampling

Lecture 06 - Distortion in a Sampling Switch

Lecture 07 - Gate Boosted Switches

Lecture 08 - Gate Boosted Switches (cont.)

Lecture 09 - Charge Injection

Lecture 10 - Sample and Hold Characterization

Lecture 11 - Sample and Hold Characterization (cont.)

Lecture 12 - Fast Fourier Transforms (FFTs) and Leakage

Lecture 13 - Spectral Windows

Lecture 14 - Spectral Windows (cont.)

Lecture 15 - ADC/DAC Definitions

Lecture 16 - Quantization Noise

Lecture 17 - Quantization Noise (cont.)

Lecture 18 - Oversampling and Noise Shaping

Lecture 19 - Delta-Sigma Modulation

Lecture 20 - Delta-Sigma Modulation (cont.)

Lecture 21 - Linearized Analysis

Lecture 22 - Stability of Delta Sigma Modulators

Lecture 23 - High Order DSMs

Lecture 24 - Noise Transfer Function (NTF) Design and Tradeoffs

Lecture 25 - Single Bit Modulators

Lecture 26 - Loop Filter Architectures

Lecture 27 - Continuous-Time Delta Sigma Modulation

Lecture 28 - Implicit Antialiasing

Lecture 29 - Modulators with NRZ and Impulsive DACs

Lecture 30 - High Order CTDSMs

Lecture 31 - CTDSM Design

Lecture 32 - Excess Loop Delay (ELD)

Lecture 33 - ELD Compensation

Lecture 34 - Effect of Clock Jitter on CTDSMs

Lecture 35 - Effect of Clock Jitter on CTDSMs (cont.)

Lecture 36 - Dynamic Range Scaling

Lecture 37 - Simulation of CTDSMs

Lecture 38 - Integrator Design

Lecture 39 - Integrator Design (cont.)

Lecture 40 - Flash ADC Design

Lecture 41 - Latches and Metastability

Lecture 42 - Offset in a Latch

Lecture 43 - Offset in a Latch (cont.), Auto Zeroing

Lecture 44 - Auto Zeroing (cont.)

Lecture 45 - Auto Zeroing (cont.)

Lecture 46 - Auto Zeroing in Flash ADCs

Lecture 47 - Flash ADC Case Study

Lecture 48 - Flash ADC Case Study (cont.)

Lecture 49 - Flash ADC in a Delta Sigma Loop

Lecture 50 - DAC Basics

Lecture 51 - Binary and Thermometer DACs

Lecture 52 - Segmented DACs

Lecture 53 - Optimal DAC Segmentation

Lecture 54 - DAC Nonlinearities

Lecture 55 - Current Steering DACs

Lecture 56 - Current Steering DACs (cont.)

Lecture 57 - DAC Mismatches in DSMs

Lecture 58 - Calibration and Randomization

Lecture 59 - Dynamic Element Matching

Lecture 60 - Dynamic Element Matching (cont.)